[{"_path":"/","_draft":false,"_partial":false,"_empty":false,"title":"Portfolio: Rachel Hogg","description":"Hi there. I've had a lot of fun, and have learned a tremendous amount working on these various personal and design-course projects. I hope you enjoy reading about them!","excerpt":{"type":"root","children":[{"type":"element","tag":"h1","props":{"id":"portfolio-rachel-hogg"},"children":[{"type":"text","value":"Portfolio: Rachel Hogg"}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"Hi there. I've had a lot of fun, and have learned a tremendous amount working on these various personal and design-course projects. I hope you enjoy reading about them!"}]},{"type":"element","tag":"h2","props":{"id":"projects"},"children":[{"type":"text","value":"Projects"}]},{"type":"element","tag":"div","props":{"className":["grid","grid-cols-1","sm:grid-cols-2","mt-6","sm:gap-10"]},"children":[{"type":"element","tag":"div","props":{"className":["rounded-xl","shadow-lg","hover:shadow-xl","cursor-pointer","mb-10","sm:mb-0","bg-secondary-light","dark:bg-ternary-dark"]},"children":[{"type":"text","value":"\n "},{"type":"element","tag":"a","props":{"href":"/projects/filamend","className":["no-underline"]},"children":[{"type":"text","value":"\n "},{"type":"element","tag":"div","props":{},"children":[{"type":"text","value":"\n "},{"type":"element","tag":"img","props":{"src":"/images/filamentwhole.png","alt":"Filamend","className":["rounded-t-xl","border-none","no-underline"]},"children":[]},{"type":"text","value":"\n "}]},{"type":"text","value":"\n "},{"type":"element","tag":"div","props":{"className":["text-center","px-0","py-2"]},"children":[{"type":"text","value":"\n "},{"type":"element","tag":"p","props":{"className":["m-0","font-general-bold","text-xl","text-ternary-dark","dark:text-ternary-light","font-bold","mb-2","no-underline"]},"children":[{"type":"text","value":"\n 3D Print Filament Recycler\n "}]},{"type":"text","value":"\n "},{"type":"element","tag":"span","props":{"className":["font-normal","text-md","text-ternary-dark","dark:text-ternary-light","no-underline"]},"children":[{"type":"text","value":"\n Mechanical and Electrical Design\n "}]},{"type":"text","value":"\n "}]},{"type":"text","value":"\n "}]},{"type":"text","value":"\n "}]},{"type":"element","tag":"div","props":{"className":["rounded-xl","shadow-lg","hover:shadow-xl","cursor-pointer","mb-10","sm:mb-0","bg-secondary-light","dark:bg-ternary-dark"]},"children":[{"type":"text","value":"\n "},{"type":"element","tag":"a","props":{"href":"/projects/recordplayer","className":["no-underline"]},"children":[{"type":"text","value":"\n "},{"type":"element","tag":"div","props":{},"children":[{"type":"text","value":"\n "},{"type":"element","tag":"img","props":{"src":"/images/recordplayer.jpg","alt":"Rad Record Player","className":["rounded-t-xl","border-none","no-underline"]},"children":[]},{"type":"text","value":"\n "}]},{"type":"text","value":"\n "},{"type":"element","tag":"div","props":{"className":["text-center","px-0","py-2"]},"children":[{"type":"text","value":"\n "},{"type":"element","tag":"p","props":{"className":["m-0","font-general-bold","text-xl","text-ternary-dark","dark:text-ternary-light","font-bold","mb-2","no-underline"]},"children":[{"type":"text","value":"\n Cardboard Record Player\n "}]},{"type":"text","value":"\n "},{"type":"element","tag":"span","props":{"className":["font-normal","text-md","text-ternary-dark","dark:text-ternary-light","no-underline"]},"children":[{"type":"text","value":"\n Raspberry Pi and Python\n "}]},{"type":"text","value":"\n "}]},{"type":"text","value":"\n "}]},{"type":"text","value":"\n "}]},{"type":"element","tag":"div","props":{"className":["rounded-xl","shadow-lg","hover:shadow-xl","cursor-pointer","mb-10","sm:mb-0","bg-secondary-light","dark:bg-ternary-dark"]},"children":[{"type":"text","value":"\n "},{"type":"element","tag":"a","props":{"href":"/projects/theukebox","className":["no-underline"]},"children":[{"type":"text","value":"\n "},{"type":"element","tag":"div","props":{},"children":[{"type":"text","value":"\n "},{"type":"element","tag":"img","props":{"src":"/images/ukebox.png","alt":"The Ukebox","className":["rounded-t-xl","border-none","no-underline"]},"children":[]},{"type":"text","value":"\n "}]},{"type":"text","value":"\n "},{"type":"element","tag":"div","props":{"className":["text-center","px-0","py-2"]},"children":[{"type":"text","value":"\n "},{"type":"element","tag":"p","props":{"className":["m-0","font-general-bold","text-xl","text-ternary-dark","dark:text-ternary-light","font-bold","mb-2","no-underline"]},"children":[{"type":"text","value":"\n Ukulele Jukebox\n "}]},{"type":"text","value":"\n "},{"type":"element","tag":"span","props":{"className":["font-normal","text-md","text-ternary-dark","dark:text-ternary-light","no-underline"]},"children":[{"type":"text","value":"\n Mechanical Design\n "}]},{"type":"text","value":"\n "}]},{"type":"text","value":"\n "}]},{"type":"text","value":"\n "}]}]}]},"navTitle":"Home","head":{"description":"This is a custom description for Content Wind about page.","image":"https://i.picsum.photos/id/866/536/354.jpg?hmac=tGofDTV7tl2rprappPzKFiZ9vDh5MKj39oa2D--gqhA"},"body":{"type":"root","children":[{"type":"element","tag":"h1","props":{"id":"portfolio-rachel-hogg"},"children":[{"type":"text","value":"Portfolio: Rachel Hogg"}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"Hi there. I've had a lot of fun, and have learned a tremendous amount working on these various personal and design-course projects. I hope you enjoy reading about them!"}]},{"type":"element","tag":"h2","props":{"id":"projects"},"children":[{"type":"text","value":"Projects"}]},{"type":"element","tag":"div","props":{"className":["grid","grid-cols-1","sm:grid-cols-2","mt-6","sm:gap-10"]},"children":[{"type":"element","tag":"div","props":{"className":["rounded-xl","shadow-lg","hover:shadow-xl","cursor-pointer","mb-10","sm:mb-0","bg-secondary-light","dark:bg-ternary-dark"]},"children":[{"type":"text","value":"\n "},{"type":"element","tag":"a","props":{"href":"/projects/filamend","className":["no-underline"]},"children":[{"type":"text","value":"\n "},{"type":"element","tag":"div","props":{},"children":[{"type":"text","value":"\n "},{"type":"element","tag":"img","props":{"src":"/images/filamentwhole.png","alt":"Filamend","className":["rounded-t-xl","border-none","no-underline"]},"children":[]},{"type":"text","value":"\n "}]},{"type":"text","value":"\n "},{"type":"element","tag":"div","props":{"className":["text-center","px-0","py-2"]},"children":[{"type":"text","value":"\n "},{"type":"element","tag":"p","props":{"className":["m-0","font-general-bold","text-xl","text-ternary-dark","dark:text-ternary-light","font-bold","mb-2","no-underline"]},"children":[{"type":"text","value":"\n 3D Print Filament Recycler\n "}]},{"type":"text","value":"\n "},{"type":"element","tag":"span","props":{"className":["font-normal","text-md","text-ternary-dark","dark:text-ternary-light","no-underline"]},"children":[{"type":"text","value":"\n Mechanical and Electrical Design\n "}]},{"type":"text","value":"\n "}]},{"type":"text","value":"\n "}]},{"type":"text","value":"\n "}]},{"type":"element","tag":"div","props":{"className":["rounded-xl","shadow-lg","hover:shadow-xl","cursor-pointer","mb-10","sm:mb-0","bg-secondary-light","dark:bg-ternary-dark"]},"children":[{"type":"text","value":"\n "},{"type":"element","tag":"a","props":{"href":"/projects/recordplayer","className":["no-underline"]},"children":[{"type":"text","value":"\n "},{"type":"element","tag":"div","props":{},"children":[{"type":"text","value":"\n "},{"type":"element","tag":"img","props":{"src":"/images/recordplayer.jpg","alt":"Rad Record Player","className":["rounded-t-xl","border-none","no-underline"]},"children":[]},{"type":"text","value":"\n "}]},{"type":"text","value":"\n "},{"type":"element","tag":"div","props":{"className":["text-center","px-0","py-2"]},"children":[{"type":"text","value":"\n "},{"type":"element","tag":"p","props":{"className":["m-0","font-general-bold","text-xl","text-ternary-dark","dark:text-ternary-light","font-bold","mb-2","no-underline"]},"children":[{"type":"text","value":"\n Cardboard Record Player\n "}]},{"type":"text","value":"\n "},{"type":"element","tag":"span","props":{"className":["font-normal","text-md","text-ternary-dark","dark:text-ternary-light","no-underline"]},"children":[{"type":"text","value":"\n Raspberry Pi and Python\n "}]},{"type":"text","value":"\n "}]},{"type":"text","value":"\n "}]},{"type":"text","value":"\n "}]},{"type":"element","tag":"div","props":{"className":["rounded-xl","shadow-lg","hover:shadow-xl","cursor-pointer","mb-10","sm:mb-0","bg-secondary-light","dark:bg-ternary-dark"]},"children":[{"type":"text","value":"\n "},{"type":"element","tag":"a","props":{"href":"/projects/theukebox","className":["no-underline"]},"children":[{"type":"text","value":"\n "},{"type":"element","tag":"div","props":{},"children":[{"type":"text","value":"\n "},{"type":"element","tag":"img","props":{"src":"/images/ukebox.png","alt":"The Ukebox","className":["rounded-t-xl","border-none","no-underline"]},"children":[]},{"type":"text","value":"\n "}]},{"type":"text","value":"\n "},{"type":"element","tag":"div","props":{"className":["text-center","px-0","py-2"]},"children":[{"type":"text","value":"\n "},{"type":"element","tag":"p","props":{"className":["m-0","font-general-bold","text-xl","text-ternary-dark","dark:text-ternary-light","font-bold","mb-2","no-underline"]},"children":[{"type":"text","value":"\n Ukulele Jukebox\n "}]},{"type":"text","value":"\n "},{"type":"element","tag":"span","props":{"className":["font-normal","text-md","text-ternary-dark","dark:text-ternary-light","no-underline"]},"children":[{"type":"text","value":"\n Mechanical Design\n "}]},{"type":"text","value":"\n "}]},{"type":"text","value":"\n "}]},{"type":"text","value":"\n "}]}]}],"toc":{"title":"","searchDepth":2,"depth":2,"links":[{"id":"projects","depth":2,"text":"Projects"}]}},"_type":"markdown","_id":"content:1.index.md","_source":"content","_file":"1.index.md","_extension":"md"},{"_path":"/about","_draft":false,"_partial":false,"_empty":false,"title":"About","description":"I'm Rachel, and I am a fourth year student in Integrated Engineering at the University of British Columbia (UBC). I have a deep love of music and our natural world, and am trying to figure out the various ways that those intersect with my drive to make cool things!","excerpt":{"type":"root","children":[{"type":"element","tag":"h1","props":{"id":"about"},"children":[{"type":"text","value":"About"}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"I'm Rachel, and I am a fourth year student in Integrated Engineering at the University of British Columbia (UBC). I have a deep love of music and our natural world, and am trying to figure out the various ways that those intersect with my drive to make cool things!"}]},{"type":"element","tag":"h3","props":{"id":"what-is-integrated-engineering"},"children":[{"type":"text","value":"What is Integrated Engineering?"}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"This program gives a more generalized engineering education, but allows us to individually tailor our courses by choosing a major and a minor specialization, with a big focus on hands-on learning through our year-long design projects."}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"I am majoring in "},{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"mechanical"}]},{"type":"text","value":", with a minor in "},{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"computer engineering"}]},{"type":"text","value":", but my courses and design projects have given me experience in a range of topics and skills, including:"}]},{"type":"element","tag":"ul","props":{},"children":[{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"Object oriented programming (python, C, C#)"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"Electrical design and implementation (KiCAD)"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"Mechanical design (SolidWorks)"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"Manufacturing processes: 3D printing, metal/woodworking, with some exposure to machining (CNC mill, lathe, waterjet cutter, etc)"}]}]},{"type":"element","tag":"h3","props":{"id":"what-do-i-hope-to-do"},"children":[{"type":"text","value":"What do I hope to do?"}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"I pursued engineering because I saw it as a way to make a genuine impact on our world, and I hope to work on meaningful projects which help make the world a cleaner and safer place for us and future generations."}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"I'm not quite sure how my skills and interests will fit into industry yet, but one thing that really interests me is the need to find creative solutions to help create a circular economy, where we fully account for not just the production of energy and materials, but also in their disposal and potential future life cycles."}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"Thank you for reading!"}]},{"type":"element","tag":"p","props":{},"children":[{"type":"element","tag":"a","props":{"href":"/contactform.html","target":"_blank","className":["h-10","px-5","text-indigo-100","bg-indigo-700","rounded-lg","transition-colors","duration-150","focus:shadow-outline","hover:bg-indigo-800"]},"children":[{"type":"text","value":"\nContact Me Here\n"}]}]}]},"navTitle":"About","layout":"project","head":{"description":"This is a custom description for Content Wind about page.","image":"https://i.picsum.photos/id/866/536/354.jpg?hmac=tGofDTV7tl2rprappPzKFiZ9vDh5MKj39oa2D--gqhA"},"body":{"type":"root","children":[{"type":"element","tag":"h1","props":{"id":"about"},"children":[{"type":"text","value":"About"}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"I'm Rachel, and I am a fourth year student in Integrated Engineering at the University of British Columbia (UBC). I have a deep love of music and our natural world, and am trying to figure out the various ways that those intersect with my drive to make cool things!"}]},{"type":"element","tag":"h3","props":{"id":"what-is-integrated-engineering"},"children":[{"type":"text","value":"What is Integrated Engineering?"}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"This program gives a more generalized engineering education, but allows us to individually tailor our courses by choosing a major and a minor specialization, with a big focus on hands-on learning through our year-long design projects."}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"I am majoring in "},{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"mechanical"}]},{"type":"text","value":", with a minor in "},{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"computer engineering"}]},{"type":"text","value":", but my courses and design projects have given me experience in a range of topics and skills, including:"}]},{"type":"element","tag":"ul","props":{},"children":[{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"Object oriented programming (python, C, C#)"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"Electrical design and implementation (KiCAD)"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"Mechanical design (SolidWorks)"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"Manufacturing processes: 3D printing, metal/woodworking, with some exposure to machining (CNC mill, lathe, waterjet cutter, etc)"}]}]},{"type":"element","tag":"h3","props":{"id":"what-do-i-hope-to-do"},"children":[{"type":"text","value":"What do I hope to do?"}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"I pursued engineering because I saw it as a way to make a genuine impact on our world, and I hope to work on meaningful projects which help make the world a cleaner and safer place for us and future generations."}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"I'm not quite sure how my skills and interests will fit into industry yet, but one thing that really interests me is the need to find creative solutions to help create a circular economy, where we fully account for not just the production of energy and materials, but also in their disposal and potential future life cycles."}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"Thank you for reading!"}]},{"type":"element","tag":"p","props":{},"children":[{"type":"element","tag":"a","props":{"href":"/contactform.html","target":"_blank","className":["h-10","px-5","text-indigo-100","bg-indigo-700","rounded-lg","transition-colors","duration-150","focus:shadow-outline","hover:bg-indigo-800"]},"children":[{"type":"text","value":"\nContact Me Here\n"}]}]}],"toc":{"title":"","searchDepth":2,"depth":2,"links":[{"id":"what-is-integrated-engineering","depth":3,"text":"What is Integrated Engineering?"},{"id":"what-do-i-hope-to-do","depth":3,"text":"What do I hope to do?"}]}},"_type":"markdown","_id":"content:3.about.md","_source":"content","_file":"3.about.md","_extension":"md"},{"_path":"/projects/filamend","_draft":false,"_partial":false,"_empty":false,"title":"FilaMEND: 3D Print Filament Recycler","description":"Engineering design course : 2023-24","excerpt":{"type":"root","children":[{"type":"element","tag":"h1","props":{"id":"filamend-3d-print-filament-recycler"},"children":[{"type":"text","value":"FilaMEND: 3D Print Filament Recycler"}]},{"type":"element","tag":"p","props":{},"children":[{"type":"element","tag":"em","props":{},"children":[{"type":"text","value":"Engineering design course : 2023-24"}]}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"My team of four wanted to work on a project which would be genuinely useful, and would help reduce plastic waste from our program's 3D print shop. Enter: Filamend, our solution for turning ABS and PLA 3D prints into recycled filament!"}]},{"type":"element","tag":"p","props":{},"children":[{"type":"element","tag":"em","props":{},"children":[{"type":"text","value":"This project was taken on from a previous student group, so we cannot take full credit for the final product, but the work that I will describe below is what I contributed to this project!"}]}]},{"type":"element","tag":"p","props":{},"children":[{"type":"element","tag":"img","props":{"src":"/images/filamentwhole.png","alt":"Filamend","className":["rounded-t-xl","border-none","no-underline"]},"children":[]}]},{"type":"element","tag":"h3","props":{"id":"project-summary"},"children":[{"type":"text","value":"Project Summary"}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"The main steps in the process are:"}]},{"type":"element","tag":"ol","props":{},"children":[{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"pre-processing/shredding system (not in scope of project)"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"melting and extruding system (extrusion barrel powered by NEMA 34)"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"cooling system (four 24V fans)"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"diameter measuring systems (load cell and hall-effect sensor)"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"spooling system (DC motor + stepper motor on linear rail to allow for even spooling)"}]}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"This system uses multiple sensors which check that the plastic's melting temperature and the filament's diameter are within the required ranges. An Arduino Mega uses this input data to control the heating band temperature and the spooling motor speed to ensure both the extrusion temperature and filament diameter are within the required ranges."}]},{"type":"element","tag":"h3","props":{"id":"design-and-engineering-skills-developed"},"children":[{"type":"text","value":"Design and Engineering Skills Developed"}]},{"type":"element","tag":"p","props":{},"children":[{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"CAD design"}]},{"type":"text","value":" (Solidworks):"}]},{"type":"element","tag":"ul","props":{},"children":[{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"Applied "},{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"tolerancing"}]},{"type":"text","value":" principles to ensure proper fit of parts (including press fit components and parts which had to be dimensioned to work with previously-existing objects)"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"Design for "},{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"manufacturing"}]},{"type":"text","value":" & "},{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"assembly"}]},{"type":"text","value":": accounted for the printing and mounting of all parts"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"Parts designed: E-Stop casing, UI box, fuseboxes, PSU mounting brackets"}]}]},{"type":"element","tag":"h5","props":{"id":"electrical-design"},"children":[{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"Electrical design"}]},{"type":"text","value":":"}]},{"type":"element","tag":"ul","props":{},"children":[{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"Used KiCAD for creating "},{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"wiring diagrams"}]}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"Followed electrical "},{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"safety standards"}]},{"type":"text","value":" for adding fuses and properly grounding the machine"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"Wired the entire system, using properly rated wire gauges and crimp connectors"}]}]},{"type":"element","tag":"p","props":{},"children":[{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"Arduino"}]},{"type":"text","value":" ("},{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"C"}]},{"type":"text","value":" programming)"}]},{"type":"element","tag":"ul","props":{},"children":[{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"Worked on entire system integration with the Arduino Mega"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"Performed thorough testing & troubleshooting of every component (however the majority of the code and control system was written by another student)"}]}]},{"type":"element","tag":"hr","props":{},"children":[]},{"type":"element","tag":"p","props":{},"children":[{"type":"element","tag":"img","props":{"src":"/images/filamentwiring.png","alt":"Filamend","className":["rounded-t-xl","border-none","no-underline"]},"children":[]}]}]},"layout":"project","navigation":false,"head":{"description":"This is a custom description for Content Wind about page.","image":"https://i.picsum.photos/id/866/536/354.jpg?hmac=tGofDTV7tl2rprappPzKFiZ9vDh5MKj39oa2D--gqhA"},"body":{"type":"root","children":[{"type":"element","tag":"h1","props":{"id":"filamend-3d-print-filament-recycler"},"children":[{"type":"text","value":"FilaMEND: 3D Print Filament Recycler"}]},{"type":"element","tag":"p","props":{},"children":[{"type":"element","tag":"em","props":{},"children":[{"type":"text","value":"Engineering design course : 2023-24"}]}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"My team of four wanted to work on a project which would be genuinely useful, and would help reduce plastic waste from our program's 3D print shop. Enter: Filamend, our solution for turning ABS and PLA 3D prints into recycled filament!"}]},{"type":"element","tag":"p","props":{},"children":[{"type":"element","tag":"em","props":{},"children":[{"type":"text","value":"This project was taken on from a previous student group, so we cannot take full credit for the final product, but the work that I will describe below is what I contributed to this project!"}]}]},{"type":"element","tag":"p","props":{},"children":[{"type":"element","tag":"img","props":{"src":"/images/filamentwhole.png","alt":"Filamend","className":["rounded-t-xl","border-none","no-underline"]},"children":[]}]},{"type":"element","tag":"h3","props":{"id":"project-summary"},"children":[{"type":"text","value":"Project Summary"}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"The main steps in the process are:"}]},{"type":"element","tag":"ol","props":{},"children":[{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"pre-processing/shredding system (not in scope of project)"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"melting and extruding system (extrusion barrel powered by NEMA 34)"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"cooling system (four 24V fans)"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"diameter measuring systems (load cell and hall-effect sensor)"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"spooling system (DC motor + stepper motor on linear rail to allow for even spooling)"}]}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"This system uses multiple sensors which check that the plastic's melting temperature and the filament's diameter are within the required ranges. An Arduino Mega uses this input data to control the heating band temperature and the spooling motor speed to ensure both the extrusion temperature and filament diameter are within the required ranges."}]},{"type":"element","tag":"h3","props":{"id":"design-and-engineering-skills-developed"},"children":[{"type":"text","value":"Design and Engineering Skills Developed"}]},{"type":"element","tag":"p","props":{},"children":[{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"CAD design"}]},{"type":"text","value":" (Solidworks):"}]},{"type":"element","tag":"ul","props":{},"children":[{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"Applied "},{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"tolerancing"}]},{"type":"text","value":" principles to ensure proper fit of parts (including press fit components and parts which had to be dimensioned to work with previously-existing objects)"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"Design for "},{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"manufacturing"}]},{"type":"text","value":" & "},{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"assembly"}]},{"type":"text","value":": accounted for the printing and mounting of all parts"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"Parts designed: E-Stop casing, UI box, fuseboxes, PSU mounting brackets"}]}]},{"type":"element","tag":"h5","props":{"id":"electrical-design"},"children":[{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"Electrical design"}]},{"type":"text","value":":"}]},{"type":"element","tag":"ul","props":{},"children":[{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"Used KiCAD for creating "},{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"wiring diagrams"}]}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"Followed electrical "},{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"safety standards"}]},{"type":"text","value":" for adding fuses and properly grounding the machine"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"Wired the entire system, using properly rated wire gauges and crimp connectors"}]}]},{"type":"element","tag":"p","props":{},"children":[{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"Arduino"}]},{"type":"text","value":" ("},{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"C"}]},{"type":"text","value":" programming)"}]},{"type":"element","tag":"ul","props":{},"children":[{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"Worked on entire system integration with the Arduino Mega"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"Performed thorough testing & troubleshooting of every component (however the majority of the code and control system was written by another student)"}]}]},{"type":"element","tag":"hr","props":{},"children":[]},{"type":"element","tag":"p","props":{},"children":[{"type":"element","tag":"img","props":{"src":"/images/filamentwiring.png","alt":"Filamend","className":["rounded-t-xl","border-none","no-underline"]},"children":[]}]}],"toc":{"title":"","searchDepth":2,"depth":2,"links":[{"id":"project-summary","depth":3,"text":"Project Summary"},{"id":"design-and-engineering-skills-developed","depth":3,"text":"Design and Engineering Skills Developed"}]}},"_type":"markdown","_id":"content:projects:filamend.md","_source":"content","_file":"projects/filamend.md","_extension":"md"},{"_path":"/projects/recordplayer","_draft":false,"_partial":false,"_empty":false,"title":"Cardboard Record Player:","description":"Personal Project","excerpt":{"type":"root","children":[{"type":"element","tag":"h1","props":{"id":"cardboard-record-player"},"children":[{"type":"text","value":"Cardboard Record Player:"}]},{"type":"element","tag":"p","props":{},"children":[{"type":"element","tag":"em","props":{},"children":[{"type":"text","value":"Personal Project"}]}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"Using RFID technology and a Raspberry Pi 4 to play homemade records!"}]},{"type":"element","tag":"iframe","props":{"width":560,"height":315,"src":"https://www.youtube.com/embed/FduNYhDQe8Y","title":"YouTube video player","frameBorder":"0","allow":"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture","allowFullScreen":true},"children":[]},{"type":"element","tag":"you-tube","props":{"video":"FduNYhDQe8Y"},"children":[]},{"type":"element","tag":"div","props":{"className":["embed-responsive","aspect-ratio-16/9"]},"children":[{"type":"text","value":"\n "},{"type":"element","tag":"iframe","props":{"className":["embed-responsive-item"],"src":"https://www.youtube.com/embed/FduNYhDQe8Y","frameBorder":"0","allow":"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope;\n picture-in-picture","allowFullScreen":true},"children":[{"type":"text","value":"\n "}]}]},{"type":"element","tag":"h4","props":{"id":"biggest-challenges"},"children":[{"type":"text","value":"Biggest challenges:"}]},{"type":"element","tag":"ul","props":{},"children":[{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"learning programming concepts like classes and objects to organize a more complex project"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"learning about web APIs"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"making an analog to digital converter using a capacitor (this was for analog inputs from a potentiometer, which I didn't end up using in the final design)"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"integrating the smaller parts together: RFID reader, spotify, motor, rotary encoder, and planning out the wiring of gpio pins"}]}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"This project was inspired by talaexe and her very creative project: "},{"type":"element","tag":"a","props":{"href":"https://youtu.be/-jGWjFR936o","rel":["nofollow","noopener","noreferrer"],"target":"_blank"},"children":[{"type":"text","value":"https://youtu.be/-jGWjFR936o"}]},{"type":"text","value":". I used her tutorial to get the RFID reader and the spotify API working, and then added my own spin (literally), by making it a turntable as well."}]},{"type":"element","tag":"h4","props":{"id":"design-process"},"children":[{"type":"text","value":"Design process"}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"Here is an intro video which aLSo shows my initial prototype, where I used a simple circuit to prototype the arm and motor functionality."}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"In the final design, a rotary encoder was used to detect motion in the arm, and the DC motor is controlled using a motor controller."}]},{"type":"element","tag":"iframe","props":{"width":560,"height":315,"src":"https://www.youtube.com/embed/jeJMT6uan6k","title":"YouTube video player","frameBorder":"0","allow":"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture","allowFullScreen":true},"children":[]}]},"layout":"project","navigation":false,"head":{"description":"This is a custom description for Content Wind about page.","image":"https://i.picsum.photos/id/866/536/354.jpg?hmac=tGofDTV7tl2rprappPzKFiZ9vDh5MKj39oa2D--gqhA"},"body":{"type":"root","children":[{"type":"element","tag":"h1","props":{"id":"cardboard-record-player"},"children":[{"type":"text","value":"Cardboard Record Player:"}]},{"type":"element","tag":"p","props":{},"children":[{"type":"element","tag":"em","props":{},"children":[{"type":"text","value":"Personal Project"}]}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"Using RFID technology and a Raspberry Pi 4 to play homemade records!"}]},{"type":"element","tag":"iframe","props":{"width":560,"height":315,"src":"https://www.youtube.com/embed/FduNYhDQe8Y","title":"YouTube video player","frameBorder":"0","allow":"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture","allowFullScreen":true},"children":[]},{"type":"element","tag":"you-tube","props":{"video":"FduNYhDQe8Y"},"children":[]},{"type":"element","tag":"div","props":{"className":["embed-responsive","aspect-ratio-16/9"]},"children":[{"type":"text","value":"\n "},{"type":"element","tag":"iframe","props":{"className":["embed-responsive-item"],"src":"https://www.youtube.com/embed/FduNYhDQe8Y","frameBorder":"0","allow":"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope;\n picture-in-picture","allowFullScreen":true},"children":[{"type":"text","value":"\n "}]}]},{"type":"element","tag":"h4","props":{"id":"biggest-challenges"},"children":[{"type":"text","value":"Biggest challenges:"}]},{"type":"element","tag":"ul","props":{},"children":[{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"learning programming concepts like classes and objects to organize a more complex project"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"learning about web APIs"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"making an analog to digital converter using a capacitor (this was for analog inputs from a potentiometer, which I didn't end up using in the final design)"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"integrating the smaller parts together: RFID reader, spotify, motor, rotary encoder, and planning out the wiring of gpio pins"}]}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"This project was inspired by talaexe and her very creative project: "},{"type":"element","tag":"a","props":{"href":"https://youtu.be/-jGWjFR936o","rel":["nofollow","noopener","noreferrer"],"target":"_blank"},"children":[{"type":"text","value":"https://youtu.be/-jGWjFR936o"}]},{"type":"text","value":". I used her tutorial to get the RFID reader and the spotify API working, and then added my own spin (literally), by making it a turntable as well."}]},{"type":"element","tag":"h4","props":{"id":"design-process"},"children":[{"type":"text","value":"Design process"}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"Here is an intro video which aLSo shows my initial prototype, where I used a simple circuit to prototype the arm and motor functionality."}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"In the final design, a rotary encoder was used to detect motion in the arm, and the DC motor is controlled using a motor controller."}]},{"type":"element","tag":"iframe","props":{"width":560,"height":315,"src":"https://www.youtube.com/embed/jeJMT6uan6k","title":"YouTube video player","frameBorder":"0","allow":"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture","allowFullScreen":true},"children":[]}],"toc":{"title":"","searchDepth":2,"depth":2,"links":[]}},"_type":"markdown","_id":"content:projects:recordplayer.md","_source":"content","_file":"projects/recordplayer.md","_extension":"md"},{"_path":"/projects/theukebox","_draft":false,"_partial":false,"_empty":false,"title":"The Ukebox:","description":"Engineering design course : 2022-23","excerpt":{"type":"root","children":[{"type":"element","tag":"h1","props":{"id":"the-ukebox"},"children":[{"type":"text","value":"The Ukebox:"}]},{"type":"element","tag":"p","props":{},"children":[{"type":"element","tag":"em","props":{},"children":[{"type":"text","value":"Engineering design course : 2022-23"}]}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"We wanted to work on a fun, yet technically rewarding project, so with five other group members, we created an autonomous ukulele jukebox!\n"},{"type":"element","tag":"img","props":{"src":"/images/ukeboxdiagram.png","alt":"Filamend","className":["rounded-t-xl","border-none","no-underline"]},"children":[]}]},{"type":"element","tag":"h2","props":{"id":"project-summary"},"children":[{"type":"text","value":"Project Summary"}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"The machine consisted of a ukulele and three main systems:"}]},{"type":"element","tag":"ul","props":{},"children":[{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"a fretting mechanism (using a grid of 12 solenoids)"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"a plucking mechanism (four servo motors)"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"a user-interface"}]}]},{"type":"element","tag":"h5","props":{"id":"these-systems-were-all-integrated-and-controlled-with-an-arduino-mega-and-uno-which-allowed-the-user-to-select-and-listen-to-a-short-list-of-songs-including-twinkle-twinkle-happy-birthday-and-never-gonna-give-you-up"},"children":[{"type":"text","value":"These systems were all integrated and controlled with an Arduino Mega and Uno, which allowed the user to select and listen to a short list of songs, including: Twinkle-Twinkle, Happy Birthday, and Never Gonna Give You Up"}]},{"type":"element","tag":"hr","props":{},"children":[]},{"type":"element","tag":"h3","props":{"id":"design-and-engineering-skills-developed"},"children":[{"type":"text","value":"Design and Engineering Skills Developed"}]},{"type":"element","tag":"ul","props":{},"children":[{"type":"element","tag":"li","props":{},"children":[{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"CAD design"}]},{"type":"text","value":" (Solidworks): design of servo mounting bracket"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"Iterative "},{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"testing"}]},{"type":"text","value":" and "},{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"design"}]}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"Electrical system troubleshooting and system powering"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"Arduino"}]},{"type":"text","value":" ("},{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"C"}]},{"type":"text","value":" programming)"}]}]},{"type":"element","tag":"hr","props":{},"children":[]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"Here are the most significant technical challenges which I personally tackled, and some of my proposed solutions:"}]},{"type":"element","tag":"table","props":{},"children":[{"type":"element","tag":"thead","props":{},"children":[{"type":"element","tag":"tr","props":{},"children":[{"type":"element","tag":"th","props":{"align":null},"children":[{"type":"text","value":"Technical Challenges"}]},{"type":"element","tag":"th","props":{"align":null},"children":[{"type":"text","value":"My Proposed Solutions"}]}]}]},{"type":"element","tag":"tbody","props":{},"children":[{"type":"element","tag":"tr","props":{},"children":[{"type":"element","tag":"td","props":{"align":null},"children":[{"type":"text","value":"Creating a reliable fretting mechanism"}]},{"type":"element","tag":"td","props":{"align":null},"children":[{"type":"text","value":"- Prototyping with various materials on end of solenoid shaft to mimic finger-pads: fabric, silicon, rubber, TPU"}]}]},{"type":"element","tag":"tr","props":{},"children":[{"type":"element","tag":"td","props":{"align":null},"children":[{"type":"text","value":"Creating a cleaner sound/recognizable songs"}]},{"type":"element","tag":"td","props":{"align":null},"children":[{"type":"text","value":"- Prototyped \"fins\" to add to side of picks to mute strings when not actively being played "},{"type":"element","tag":"br","props":{},"children":[]},{"type":"element","tag":"br","props":{},"children":[]},{"type":"text","value":" - Designed & 3D printed plucking servo holder, to allow for precise adjustment in pick height + postion"}]}]},{"type":"element","tag":"tr","props":{},"children":[{"type":"element","tag":"td","props":{"align":null},"children":[{"type":"text","value":"Powering the device"}]},{"type":"element","tag":"td","props":{"align":null},"children":[{"type":"text","value":"- Used a laptop power supply plugged into 120V AC, in tandem with buck converter to achieve desired 6.6V DC"}]}]},{"type":"element","tag":"tr","props":{},"children":[{"type":"element","tag":"td","props":{"align":null},"children":[{"type":"text","value":"Solenoids overheating"}]},{"type":"element","tag":"td","props":{"align":null},"children":[{"type":"text","value":"- Changed solenoid orientation, so that thier retracted state was \"off\" to reduce the time that current would flow through"},{"type":"element","tag":"br","props":{},"children":[]},{"type":"element","tag":"br","props":{},"children":[]},{"type":"text","value":" - Reduced supply voltage (using buck converter)"}]}]}]}]},{"type":"element","tag":"img","props":{"src":"/images/ukebox.png","alt":"Image 1","className":["active"]},"children":[]},{"type":"element","tag":"img","props":{"src":"/images/ukeboxdiagram.png","alt":"Image 2","className":["active"]},"children":[]}]},"layout":"project","navigation":false,"head":{"description":"This is a custom description for Content Wind about page.","image":"https://i.picsum.photos/id/866/536/354.jpg?hmac=tGofDTV7tl2rprappPzKFiZ9vDh5MKj39oa2D--gqhA"},"body":{"type":"root","children":[{"type":"element","tag":"h1","props":{"id":"the-ukebox"},"children":[{"type":"text","value":"The Ukebox:"}]},{"type":"element","tag":"p","props":{},"children":[{"type":"element","tag":"em","props":{},"children":[{"type":"text","value":"Engineering design course : 2022-23"}]}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"We wanted to work on a fun, yet technically rewarding project, so with five other group members, we created an autonomous ukulele jukebox!\n"},{"type":"element","tag":"img","props":{"src":"/images/ukeboxdiagram.png","alt":"Filamend","className":["rounded-t-xl","border-none","no-underline"]},"children":[]}]},{"type":"element","tag":"h2","props":{"id":"project-summary"},"children":[{"type":"text","value":"Project Summary"}]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"The machine consisted of a ukulele and three main systems:"}]},{"type":"element","tag":"ul","props":{},"children":[{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"a fretting mechanism (using a grid of 12 solenoids)"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"a plucking mechanism (four servo motors)"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"a user-interface"}]}]},{"type":"element","tag":"h5","props":{"id":"these-systems-were-all-integrated-and-controlled-with-an-arduino-mega-and-uno-which-allowed-the-user-to-select-and-listen-to-a-short-list-of-songs-including-twinkle-twinkle-happy-birthday-and-never-gonna-give-you-up"},"children":[{"type":"text","value":"These systems were all integrated and controlled with an Arduino Mega and Uno, which allowed the user to select and listen to a short list of songs, including: Twinkle-Twinkle, Happy Birthday, and Never Gonna Give You Up"}]},{"type":"element","tag":"hr","props":{},"children":[]},{"type":"element","tag":"h3","props":{"id":"design-and-engineering-skills-developed"},"children":[{"type":"text","value":"Design and Engineering Skills Developed"}]},{"type":"element","tag":"ul","props":{},"children":[{"type":"element","tag":"li","props":{},"children":[{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"CAD design"}]},{"type":"text","value":" (Solidworks): design of servo mounting bracket"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"Iterative "},{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"testing"}]},{"type":"text","value":" and "},{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"design"}]}]},{"type":"element","tag":"li","props":{},"children":[{"type":"text","value":"Electrical system troubleshooting and system powering"}]},{"type":"element","tag":"li","props":{},"children":[{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"Arduino"}]},{"type":"text","value":" ("},{"type":"element","tag":"strong","props":{},"children":[{"type":"text","value":"C"}]},{"type":"text","value":" programming)"}]}]},{"type":"element","tag":"hr","props":{},"children":[]},{"type":"element","tag":"p","props":{},"children":[{"type":"text","value":"Here are the most significant technical challenges which I personally tackled, and some of my proposed solutions:"}]},{"type":"element","tag":"table","props":{},"children":[{"type":"element","tag":"thead","props":{},"children":[{"type":"element","tag":"tr","props":{},"children":[{"type":"element","tag":"th","props":{"align":null},"children":[{"type":"text","value":"Technical Challenges"}]},{"type":"element","tag":"th","props":{"align":null},"children":[{"type":"text","value":"My Proposed Solutions"}]}]}]},{"type":"element","tag":"tbody","props":{},"children":[{"type":"element","tag":"tr","props":{},"children":[{"type":"element","tag":"td","props":{"align":null},"children":[{"type":"text","value":"Creating a reliable fretting mechanism"}]},{"type":"element","tag":"td","props":{"align":null},"children":[{"type":"text","value":"- Prototyping with various materials on end of solenoid shaft to mimic finger-pads: fabric, silicon, rubber, TPU"}]}]},{"type":"element","tag":"tr","props":{},"children":[{"type":"element","tag":"td","props":{"align":null},"children":[{"type":"text","value":"Creating a cleaner sound/recognizable songs"}]},{"type":"element","tag":"td","props":{"align":null},"children":[{"type":"text","value":"- Prototyped \"fins\" to add to side of picks to mute strings when not actively being played "},{"type":"element","tag":"br","props":{},"children":[]},{"type":"element","tag":"br","props":{},"children":[]},{"type":"text","value":" - Designed & 3D printed plucking servo holder, to allow for precise adjustment in pick height + postion"}]}]},{"type":"element","tag":"tr","props":{},"children":[{"type":"element","tag":"td","props":{"align":null},"children":[{"type":"text","value":"Powering the device"}]},{"type":"element","tag":"td","props":{"align":null},"children":[{"type":"text","value":"- Used a laptop power supply plugged into 120V AC, in tandem with buck converter to achieve desired 6.6V DC"}]}]},{"type":"element","tag":"tr","props":{},"children":[{"type":"element","tag":"td","props":{"align":null},"children":[{"type":"text","value":"Solenoids overheating"}]},{"type":"element","tag":"td","props":{"align":null},"children":[{"type":"text","value":"- Changed solenoid orientation, so that thier retracted state was \"off\" to reduce the time that current would flow through"},{"type":"element","tag":"br","props":{},"children":[]},{"type":"element","tag":"br","props":{},"children":[]},{"type":"text","value":" - Reduced supply voltage (using buck converter)"}]}]}]}]},{"type":"element","tag":"img","props":{"src":"/images/ukebox.png","alt":"Image 1","className":["active"]},"children":[]},{"type":"element","tag":"img","props":{"src":"/images/ukeboxdiagram.png","alt":"Image 2","className":["active"]},"children":[]}],"toc":{"title":"","searchDepth":2,"depth":2,"links":[{"id":"project-summary","depth":2,"text":"Project Summary","children":[{"id":"design-and-engineering-skills-developed","depth":3,"text":"Design and Engineering Skills Developed"}]}]}},"_type":"markdown","_id":"content:projects:theukebox.md","_source":"content","_file":"projects/theukebox.md","_extension":"md"}]